40 | P a g e
6.1.10 Alarms
Visual Alarms will populate on the Home Screen with a readable notification popup. Recall this feature must be enabled
in the Notification Settings Page. If the Mute option is also enabled the user will also be shown a mute icon attached to
the notification, indicating that the alarm can be muted by tapping on the speaker icon to mute an alarm. Touching an
active alarm on the Home screen will take you to a troubleshooting page which will have more detail of the active alarm
and assist you in correcting the notified alarm.
• The LEAK DETECTED CHECK FORMALIN COLLECTION alarm notification indicates a leak sensor located in the
collection area has observed a fluid leak.
• The LEAK DETECTED CHECK FORMALIN DISPENSING alarm notification indicates a leak sensor located in the
collection area has observed a fluid leak.
• The Air Filter Alarm indicates that the air filter timer has expired, and that it is time to replace the filters.
• FORMALIN COLLECTION FULL indicates that the collection container underneath the unit is full and needs to be
disposed of per lab procedure.
• FORMALIN DISPENSE LOW indicates that the dispense tank is less than 15% of the tank capacity and it is
recommended to be refilled.
• BLOWER NOISE OVER 80 DECIBELS popup alarm will show when the recirculation fans are at the upper limit of
operation notifying user that hearing protection is required. A red icon on the top of the homepage will show an
icon an ear which will show more details on the alarm.
• CHANGE AIR FILTER RESET TIMER indicates that the air filter timer has expired and is notifying that the filers
need to be changed.
• REDUCED AIRFLOW CHECK FOR BLOCKAGE indicates that the air flow has dropped below the indication level set
in the Airflow Monitoring page.
To Next Page
Loading...
