19 | P a g e
3.4.2 Ferrous Steel
• The only ferrous steel used on the Maestro is in the lower frame weldment where the linear actuators mount.
• If equipped with a magnetic tool bar this will also be made from steel.
3.4.3 Aluminum
• The elevation guideposts are made from aluminum and located in the frame ends.
• If the unit is equipped with a monitor and keyboard arm accessories those are also made of aluminum.
3.4.4 Plastic
• The cutting board and formalin dispense tank lid are made of thick HDPE.
• The waterlines, fittings, flexible vent ducts, and collection carboys are typically made of thermoplastics like
polypropylene, vinyl, and polyvinyl chloride and should be recycled accordingly.
3.4.5 Electronics
• The unit has internal circuitry, circuit boards, a touch screen, LED lighting, and actuators that should be
recycled as electronic components.
To Next Page
Loading...
