25 | P a g e
5 Factory Options & Accessories
5.1 Standard Features
5.1.1 The Maestro is equipped with the following standard features.
• Dimensions: 60" L x 32" W x 75" H & 87” elevated (1.5m L x 0.8m W x 1.9m H elevated 2.2)
• Stainless steel construction
• 10” (25.4cm) deep sink located on the right or left side (as configured)
• Backdraft ventilation
• In-house ventilation duct stubs with (2x) 8" (20.32cm) round flex ducts
• Touch screen control panel and alert system.
• On-Demand FAS system
• Seismic anchoring points
• Integrated hood-mounted camera cut-out and cover plate
• Faucet mixing-flow control
• Side/column accessory mounts
• (4) Power outlets rated at 15amps: (2 G.F.C.I. receptacles, 2 with USB power)
• One (1) perforated grid plate
• One (1) sliding work surface cutting board, white
• Two (2) wire ports for cord management
• 1/2 Hp. Disposal (dry)
• Magnetic instrument bar
• One (1) large and one (1) small organizer bin
• Ensemble Pegboard™ System
• C-Fold Paper Towel Dispenser
• Single Shelf
• Replaceable ventilation filter mount in the from grill
• Pathcam ready Camera system. The camera is preinstalled and comes with every unit.
5.1.2 Customization (CUST) & Modification (MOD)
• If your base unit has a feature customized the Model No. will show a “CUST” suffix
• If your base unit has a feature removed Model No. may show a “MOD” suffix
5.2 Factory Configured Options
Factory-configured options are integrated or built into the unit and should be ordered when built. Although not
recommended some options can be retrofitted in the field but will require a factory-trained technician. This could also
require the unit to undergo inspection per local guidelines or electrical safety codes.
To Next Page
