66 | P a g e
8.2.4.1 Replacing Garbage Disposal
• Standard Models use a ½ HP disposal Mopec part PP1029 – (Moen GX50C)
o https://manualzz.com/doc/51091831/moen-gx50c-specifications-sheet
o Disconnect the power cord, loosen the hose clamp, and disconnect the flexible drain line. Lastly, remove
the lock ring at the disposal. Reference Moen GX50C specification for more information.
• MB1021 Optioned Models use a 1 HP disposal Mopec part PP0944 – (Moen GX100C)
o https://manualzz.com/doc/53171928/moen-gx100c-gx-series-1-hp-continuous-feed-garbage-dispos
o The MB1021 option includes a water injection feature. Disconnect the water injection line by loosening
the hose clamp at the disposal inlet.
If the above links don’t work try https://www.moen.com/ and enter the Moen model number.
8.2.4.2 Garbage Disposal Air Switch service
The garbage disposal is operated via an air switch. This is a safety device that enables the disposal to be turned on with
an air pulse versus running electricity.
• Check that the air switch is functioning properly. Make sure it pushes in completely and does not stick due to
debris or grim buildup. Verify the air line connection at the push button and the switch.
To Next Page
Loading...
