12 | P a g e
o Hand spray/End rinse (if equipped)
C. Hood
The hood or backsplash is the conduit for ventilation. Both in-house (supplied by the facility) and
recirculating (supplied and powered by the workstation) are constructed into the hood. It also contains
the airflow monitoring system, user interface panel, ground fault-protected electrical outlets, and peg
board mounting for numerous accessories available for the workstation.
• Hood Controls (c.)
o Main Power Switch – Powers the unit on/off
o Touch Screen – interface for Microprocessor-controlled features on the unit.
o Disposal Switch – powers the disposal unit on/off
o Hands-free Infrared Faucet Switch – Infrared motion sensor for faucet
2.7 Warranty Statement
Products manufactured by Mopec will be free from defects in material and workmanship and conform to Mopec's
description or specifications. If a warranty claim is made within one (1) year from the date of shipment or the date of
installation (if installation is provided by Mopec), the defective or nonconforming Product or Part thereof will be
repaired or (at Mopec's option) replaced free of charge, FCA Mopec's dock. All warranty claims must be in writing and
received by Mopec within the warranty period. The warranty is not transferable (other than to customers of Mopec’s
authorized Distributors), and will not apply unless the Equipment has been properly installed, maintained, and operated
in accordance with all instructions; and does not apply to defects, nonconformities, or other failure due to Equipment
misuse, abuse, modifications, or other causes outside Mopec‘s control. THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE WARRANTY AS SET FORTH HEREIN IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. To the extent that Mopec is acting as a supplier of Products manufactured by a third party, the
Products will be warranted only to the extent that they are warranted by their manufacturers and Buyer (or its
customer) agrees to look solely to the Product manufacturer for all warranty claims. For shipments outside the United
States or Canada, as to any defective or non-conforming part, the part will be replaced upon return of the part to
Mopec. Mopec will owe no obligation to perform any repair or to install any replacement part.
To Next Page
Loading...
