54 | P a g e
• While holding both buttons, the unit will then move to the lowest position and synchronize and level out.
• Continue to hold for another 3 seconds and then release both buttons.
• Adjust the unit up and down and confirm the unit has remained level. Repeat the reset procedure multiple
times if you suspect it has not fully leveled out.
• Verifying the unit is level at all heights confirms the unit is elevating properly.
7.1.6 Resetting the Main GFCI
Should the unit trip the Main GFCI; the controls, touch screen, and auxiliary power outlets will no longer be powered.
First, check that your unit has tripped by referencing the image below.
To Next Page
Loading...
