50 | P a g e
• Suspected electrical issue.
o Turn off the main power switch.
▪ Any faucets or fixtures that are controlled by solenoids will close automatically.
o Turn off the unit’s facility breaker if further electrical issues are detected.
• Suspected plumbing issue.
o Turn off all water fixtures, typically the mixing valve levers will do this.
o Turn off the End Rinse or Foot pedal if the leak continues.
o Turn off the facility water supply to the unit if further plumbing issues are detected.
• Air Flow Alert
o Check for facility flow, and alert laboratory management.
To Next Page
Loading...
