EasyManua.ls Logo

Mortara X-Scribe - User Manual

Mortara X-Scribe
102 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REF 9515-151-50-ENG Rev S1
X-Scribe
STRESS EXERCISE TESTING SYSTEM
USER MANUAL
Manufactured by Mortara Instrument, Inc., Milwaukee, Wisconsin U.S.A.
CAUTION: Federal law restricts this device to sale by or on the order of a physician.

Table of Contents

Questions and Answers

  • M
    Mark BakerAug 25, 2025
    Why won't my Mortara X-Scribe Medical Equipment treadmill turn on?
    • G
      grantjamieAug 26, 2025
      If the treadmill does not respond to the ON command from X-Scribe, it might be due to incorrect power-up sequence, the treadmill power switch being off, an improperly attached treadmill cable, an engaged emergency stop switch, or incorrect treadmill settings. Turn the treadmill OFF using the Softkey menu, then turn the power to the treadmill OFF. Wait one minute, then turn the power back ON and proceed with the test. Ensure the treadmill to X-Scribe cable connections are secure and the treadmill main power switch is ON (located at the base of the treadmill hood, left side). Reset the emergency stop switch by turning it clockwise one-quarter turn. Reset X-Scribe. Set the treadmill to the proper setting for the corresponding treadmill.
  • C
    crawfordbrendaAug 23, 2025
    What to do if squared lines appear on Mortara X-Scribe display?
    • N
      Nicholas GomezAug 23, 2025
      If you see squared lines on the multi-lead rhythm display or during an exercise test, it may be due to a lead fail from poor skin-to-electrode contact, a broken lead wire/cable, or a channel mismatch between the transmitter and X-Scribe. Correct the faulty lead(s) identified in the upper right corner of the screen. If needed, replace the patient cable or match the channel of the transmitter to the channel on X-Scribe.

Summary

User Safety Information

Warning and Caution Symbol Definitions

Defines symbols for warnings, cautions, and notes to ensure safe operation.

General Safety Precautions

Provides essential safety guidelines for operating the device.

Electrical and Patient Safety Guidelines

Ensures electrical safety and patient protection during use.

Specific Operational Hazards and Warnings

Highlights hazards like defibrillation, flammable anesthetics, and improper use.

Introduction Section 1

Manual Purpose and Audience

Outlines the manual's scope and intended reader.

Intended Use and Indications for Use

Defines the device's purpose and when it should be used.

System Description and Components

Details the X-Scribe system, its features, and included parts.

X-Scribe Specifications Overview

Lists the technical specifications of the X-Scribe system.

Setup and Installation Section 2

X-Scribe System Setup and Installation

Step-by-step guide for assembling and installing the X-Scribe system.

Interconnect Diagram and Isolation Transformer

Visual guide to system connections and details on the isolation transformer.

Using the X-Scribe Section 3

Starting the X-Scribe Application

Instructions for powering on and launching the X-Scribe software.

Key Features and Capabilities

Overview of the X-Scribe's functions and features.

User Interface and System Display

Explanation of the graphical user interface and on-screen data.

Function Key Operations and Controls

Details the use of function keys for system control.

Conducting a Stress Test Section 4

Patient Preparation and Hookup Procedures

Steps for preparing the patient and attaching electrodes.

Using Filters for Signal Quality

Guides on applying filters like SCF, AC, and 40 Hz.

Conducting the Test: Phases and Workflow

Details on test phases: Pre-Exercise, Exercise, Recovery, and Final Report.

Report Management and Archiving

Procedures for managing, printing, and archiving test reports.

System Configuration Section 5

System Settings and RF Scan

Configuring AC frequency, RF channels, and performing RF scans.

User Profile and Exercise Protocol Management

Creating, modifying, and selecting user profiles and exercise protocols.

Network Configuration and User Setup

Setting up network data export/import and standard user configurations.

Maintenance and Troubleshooting Appendix A

Routine Maintenance and Cleaning Instructions

Guidelines for regular equipment cleaning and upkeep.

Troubleshooting Chart and System Information Log

Diagnosing issues and recording system details for service.

Mortara X-Scribe Specifications

General IconGeneral
BrandMortara
ModelX-Scribe
CategoryMedical Equipment
LanguageEnglish

Related product manuals