Figure 4: Shirt Clip Mount
Table 2: Shirt Clip Mount Items
Item Description
1 Clip
2 Brackets
3 Camera anchor tabs
4 Back
5 Front
6 Shirt clip
Procedure:
1 To attach the camera to the front of the mount before clipping on the shirt, perform the following
actions.
a Set the camera in the anchor tabs.
b Press it into the brackets at the top of the mount.
2 Rotate the clip so that the camera is in the vertical position.
3 Press the clip to open it and clip it to your shirt.
4 Press the silver bar on top to release the camera.
MN009878A01-B
Chapter 2 : V700 During a Shift
24