Motorola solutions V700 - Figure 23: Connecting to the V700

Figure 23: Connecting to the V700
Item Description
1 All previous device pairing information clears when you start the process. Any events
in memory will still be on the camera.
2 SmartControl is searching for a camera to connect to. It only takes a few seconds
to search for the connection. (Searching times out after 30 seconds. Try again if this
happens.)
3 The app finds any close camera. Check the screen on the V700 UI for your camera
name. Touch the area with the camera ID on the screen to select your camera.
4 Enter the Pin number shown on the V700 on the line provided for the Bluetooth pairing
in SmartControl.
The Samsung A10s running Android 10 and Sony Xperia L4 device running Android 9 may have
trouble pairing with SmartControl. It does not recognize the ID number and responds as invalid pin. Try
it again and it should work.
MN009878A01-B
Chapter 5 : SmartControl for Mobile
77