Motorola solutions V700 - Wifi Base Leds; Figure 18: Leds on the Wifi Base; Table 16: Leds on the Wifi Base Items; Table 17: LED and Wifi Base Status

Status Transfer Station II
Power fail Main Power LED red solid
Backend server connected, transfer station link
detected
LED amber green
Backend server not connected, transfer station
link not detected
Link LED off
No MAC Address Main Power LED red blinks
3.13.2
WiFi Base LEDs
The two LEDs on the front of the WiFi Base show the power connection status. The LEDs are
light-sensitive and adjust to the ambient light.
Figure 18: LEDs on the WiFi Base
NOTE: When V700 pairs with the WiFi Base, the camera display shows a Wi-Fi signal strength
icon ( ) that indicates the strength of the Wi-Fi signal coming from the WiFi Base.
Table 16: LEDs on the WiFi Base Items
Item Description
1 Network linking indicator
2 Charge indicator
Table 17: LED and WiFi Base Status
LED State WiFi Base status
No light Powered off
Red Solid Charge error
Red Blinking Error condition
, pairing not successful
Red Blinking Error condition
Green Solid Fully charged
Green Blinking In the shutdown or wireless upload timeout peri-
od
MN009878A01-B
Chapter 3 : V700 Overview
67