Motorola solutions V700 - Event Categorization on the Camera in a Recording Group; Work in Covert Mode; Entering Covert Mode; Exiting Covert Mode

The display shows Saved in small text, including the event category in large text. The camera
vibrates when the category is saved. Depending on your alert configuration, one long tone
sounds with a vibration.
If another recorded event starts either manually or automatically while the camera is in
the middle of the event categorization sequence, the camera saves the event category as
UNKNOWN and starts a new event. The event can be categorized later in your agency evidence
management system.
2.7.3.1
Event Categorization on the Camera in a Recording Group
If your V700 is a member of a recording group that connects with a 4RE or M500 DVR, the camera
can automatically accept an event category from the 4RE or M500 DVR group member as its own
category. Any category selected directly on the V700 overrides the 4RE or M500 category.
If your V700 is connected to the SmartControl smartphone app, you can categorize an event using
SmartControl and add secondary event tags. Any category selected on SmartControl overrides a
4RE or M500 category. If you categorize an event on both the camera and the smartphone app, the
last selected category, regardless of the device, is applied to the event. For more information, see
SmartControl for Mobile on page 73.
2.7.4
Work in Covert Mode
In Covert Mode, the V700 makes no sound and all LED lights turn off. Depending on your
configuration, the display backlight can light up on demand. Additionally, depending on the configured
alert notifications, the camera can vibrate in Covert Mode. All V700 functions operate the same way in
Covert Mode as they do in normal mode.
NOTE: Whether Covert Mode is available, it is configurable by your administrator.
2.7.4.1
Entering Covert Mode
Procedure:
To transition to Covert Mode, press and hold the Function button for five seconds.
You can enter Covert Mode using the SmartControl smartphone app. For more information, see
Streaming Live Video on page 84.)
The camera vibrates and displays in Covert Mode. The display changes from black on white to gray on
black during Covert Mode. All content on the display is the same in Covert Mode as in normal mode.
2.7.4.2
Exiting Covert Mode
Procedure:
To exit Covert Mode, press and hold the Function button for five seconds.
You can enter Covert Mode using the SmartControl smartphone app.
The camera plays a tone. The LEDs turn on and the Display Backlight LED remains on.
MN009878A01-B
Chapter 2 : V700 During a Shift
33