- The camera checks every 30 minutes for a firmware upgrade
The camera is ready for operation when you undock it from the WiFi Base.
IMPORTANT: IP address 192.168.99.x is reserved for USB and WiFi Bases.
2.14.2
Dock the V700 in a Transfer Station II
IMPORTANT: You must first set up and configure the Transfer Station II. For more information,
see the Transfer Station II Quick Start User Guide.
When you dock the V700 and battery in a Transfer Station II, the following occurs:
• The V700 stand-alone battery charges
• The V700 time and date synchronize with your agency evidence management system
• The V700 checks every 30 minutes for a firmware upgrade
CAUTION: The V700 sets its internal date and time from your agency evidence management
system. If the computer date and time is incorrect, the camera is set incorrectly, and your video
evidence is marked with the incorrect date and time.
Figure 9: Transfer Station II
Item Description
1 Stand alone battery
2 V700 camera and battery
3 Slot ID
4 Slot ID
5 Individual slot power LEDs
MN009878A01-B
Chapter 2 : V700 During a Shift
49