• Power Button on page 58
Table 10: V700 Buttons
Item Description
1 Function button
2 Display Backlight button
3 Record Start/Stop button
4 Power button
3.4.1
Function Button
The Function button is on the top of the camera and controls the following functions:
• Brings up the Menu screen
• Allowing you to select a category tag when tagging an event
• Sensors
• Device Info
• Enabling Covert Mode by pressing and holding the Function button
3.4.2
Display Backlight Button
The Display Backlight button is on the right side as you look at the front of the camera.
The screen backlight turns on when you power up the camera until it reaches the ready screen.
The screen backlight turns on when you power off the camera and remains on until the camera powers
off.
You can use the Display Backlight button to perform the following functions:
• Cycling through the Menu screens (see User Interface Menu Flow)
• Cycling through the Info Sequence screens (see User Interface Info Sequence)
MN009878A01-B
Chapter 3 : V700 Overview
57