Chapter 5
SmartControl for Mobile
SmartControl runs on any Android phone running Android 6 or higher and on any iPhone running iOS
12 or higher.
NOTE: If you are using an iPhone, you must enable Maximum Compatibility mode. For more
information, see https://support.apple.com/en-us/HT203302.
5.1
SmartControl Overview
SmartControl is the companion smartphone application for the V700 Body-Worn Camera, allowing
officers to view evidence and tag videos on their phone or tablet. SmartControl works in both portrait
and landscape mode, making it convenient to use on tablets.
SmartControl connects wirelessly to V700, in which the camera acts as an 802.11n Wi-Fi access point
(hotspot) for the smartphone.
The SmartControl application gives you the capability to perform the following functionalities:
Table 20: SmartControl Functionalities
• Review recorded events
• Categorize recorded events
• Add secondary tags
• Start and stop recorded events
• Adjust camera LEDs
• Enter and exit Covert Mode
• Set Officer Preferences
• Live stream video
• Start and Stop a recording
• Enter and exit Covert Mode
IMPORTANT: IP address 192.168.98.x is reserved for SmartControl.
5.1.1
Downloading the SmartControl App
Procedure:
1 To download the SmartControl app on an Android device, perform the following actions:
a On the device, go to the Google Play Store.
b Search for SmartControl for Android.
The SmartControl app icon for Android appears for you to download.
Figure 19: SmartControl App for Android
MN009878A01-B
SmartControl for Mobile
73
To Next Page
Loading...
