• The upload icon appears on the display, indicating that the automatic upload over
LTE has begun.
• After the upload is complete, the checkmark icon appears on the display to confirm
that the agency evidence management system has received the event.
4 Optional: Log onto your agency evidence management system to locate and play back the
recorded event that uploaded over LTE.
6.3
Uploading Events Manually over LTE
You can upload events manually to the agency evidence management system over LTE through the
V700 Menu in the camera. To manually upload events over LTE, your agency must configure this
feature for V700 cameras in the agency evidence management system.
Procedure:
1 To enter Menu Mode, press the Function button.
2 To cycle to the Upload Menu category, press the Display Backlight button.
3 To enter the Upload Submenu, on the Upload Menu item, press the Function button.
One of the following results occurs:
• If the device is not in an uploading session and depending on the configuration of the
camera, V700 displays All Events or Critical Events.
• If the camera is in an uploading session, V700 displays Cancel Upload.
The cancel upload icon appears on the home screen while the cancellation is in
progress and disappears after the cancellation is complete.
• If there are no events to upload, V700 displays No Events or No Criticals.
• If the device is connected to SmartControl, V700 displays App Blocking.
4 To start the manual upload, select either All Events or Critical Events.
NOTE: You can cancel an event upload that is in progress. All events that are uploaded
before pressing the Cancel Upload button remain uploaded and flagged for aging.
After the upload is complete, you receive a confirmation message.
MN009878A01-B
Chapter 6 : LTE Wireless Service
88
To Previous Page
Loading...
