Motorola solutions V700 - Figure 5: Jacket Clip Mount; Table 3: Jacket Clip Mount Items

Figure 5: Jacket Clip Mount
Table 3: Jacket Clip Mount Items
Item Description
1 Front
2 Back
3 Brackets
4 Camera anchor tabs
5 Clip on back of mount
6 Jacket clip
Procedure:
1 Attach the camera to the front of the mount before clipping on the jacket.
2 Set the camera in the anchor tabs.
3 Press the camera into the brackets at the top of the mount.
4 Rotate the clip so that the camera is in the vertical position.
5 Press the clip to open it.
MN009878A01-B
Chapter 2 : V700 During a Shift
26