Chapter 6
LTE Wireless Service
The V700 body-worn camera is equipped with an internal LTE modem and wireless carrier SIM card
from Verizon, AT&T/FirstNet or Bell Mobility (in Canada). The LTE service is not active by default. To
activate LTE service, please contact your carrier of choice. The internal modem IMEI and SIM card
ICCID are listed on the packaging box label of the camera and the QR Code on the back housing label
of the camera. After the LTE service is activated, it will be active when the camera is turned on and not
docked in a Transfer Station, USB Base, or WiFi Base.
The V700 automatically connects to the provisioned wireless carrier network. Connectivity and roaming
on available carrier networks are controlled automatically by V700 and do not require user intervention.
The user does not have access to disable the LTE modem operation. The modem remains idle when
not in use.
NOTE: If LTE signal level is below 50%, the V700 will suspend automatic upload and cancel
manual upload. When the signal is back above 50%, automatic upload will restart and manual
upload has to be restarted manually through the menu.
NOTE: For specific models, the LTE service may be disabled (airplane mode) by default, but
GPS location coordinates logging into video recordings is still available.
6.1
LTE Service Icons
Different indicators can appear on the V700 display to convey the status of your LTE service.
Table 23: LTE Service Icons
Indicator Description
When LTE service is enabled, the 4G icon is
displayed in the bottom right corner of the cam-
era screen. When the V700 camera is regis-
tered and connected to a wireless carrier net-
work, the 4G icon bars represent the signal
strength of the network reception.
When the V700 camera is not connected to
a network or searching for a network, an X is
shown under the 4G signal strength.
When the V700 camera is connected to your
agency evidence management system and is
available to send location updates, stream
live video, or upload video recordings, a dark
square appears around the 4G signal strength
icon.
When V700 has a low 4G reception, the LTE
SIGNAL WEAK message appears on the dis-
play of the camera. The message only appears
when the 4G reception is lower than 50%. Once
the message appears, it stops the in-progress
MN009878A01-B
Chapter 6 : LTE Wireless Service
86
To Next Page
Loading...
