Motorola iDEN Site Controller User Manual

68P80801E30-A 5/1/2002 6-3
Gen 3 Site Controller System Manual Chapter 6 System Testing
Site Controller Verification
Site Controller
Verification
The cabinet verification consists of:
Section Page This section . . .
Site Controller
Verification
6-3 describes the Site Controller start up
sequence and configuration
Loading the Base
Radios
6-12 describes how to download the application
code to each Base Radio
Standby Site Controller
Status
6-14 describes how to check the status of the
standby site controller system
Base Radio
Registration
6-15 describes how to check the registration and
status of each Base Radio within the system
T1 Connection Test 6-17 describes how to locally manufacture a T1
test cable; also how to set-up and perform a
loop-back test on the T1 line
EAS/EAS2 Alarm
Checkout
6-25 describes how to verify that EAS/
EAS2-monitored site alarms work properly
GPS Status 6-29 describes how to check the alarm, GPS, and
on-line status of the GPS
Site Reference 6-31 provides a timing reference and a frequency
reference to the base radios.

Motorola iDEN Site Controller Specifications

General

Brand	Motorola
Model	iDEN Site Controller
Category	Controller
Language	English