Motorola iDEN Site Controller - Page 62

Chapter 3 Pre-Installation Gen 3 Site Controller System Manual
Recommended Tools, Equipment, and Parts
3-32 68P80801E30-A 5/1/2002
tie wrap gun n/a locally procured n/a
tool box n/a locally procured n/a
torque wrenches 6680388A27 Motorola tightening battery
lug nuts
5/16” breaking
type, 5 in-lbs
locally procured for SMA
connectors
drives for 5/16”
torque wrench
6” extension,
3/8” drive
Snap-on n/a
1” deep 6 point
socket, 3/8” drive
n/a
5/8” deep socket,
3/8” drive
Ind Pneumatic n/a
9/16” deep
socket, 3/8” drive
n/a
1” deep socket,
3/8” drive
n/a
1/4” hex to 3/8”
hex drive
n/a
TORX driver
with bits (handle
storage)
n/a locally procured n/a
tweezers n/a locally procured n/a
vacuum cleaner 0180382A11 Motorola general clean-up
wire cutters n/a locally procured cutting power
cables (#6 AWG to
250 MCM)
wrenches, open
end
3/8” locally procured n/a
1-1/16” n/a
wrist strap n/a locally procured n/a
Table 3-8 Recommended tools for installation — continued
Tool Model/type Supplier Purpose