Motorola MBX Series - APPENDIX A Specifications; General Specifications; Table A-1. MBX Series Specifications

A-1
A
ASpecifications
This appendix lists general specifications and power characteristics for
MBX series embedded controllers. It also describes cooling requirements
and FCC compliance.
A complete functional description of the MBX series embedded controller
appears in Chapter 5, Functional Description. Specifications for the
optional expansion modules can be found in the documentation for those
modules.
General Specifications
The following table lists general specifications for MBX boards.
Table A-1. MBX Series Specifications
Characteristic Specification
Operating Temperature 0° C to 70° C (32° F to 158° F) entry air with forced-air cooling
(see also Cooling Requirements on page A-3)
Storage Temperature −40° C to +85° C (−40° F to 185° F)
Relative Humidity 10% to 90% (non-condensing)
Physical Dimensions (base
board only)
EBX form factor base board
Width
Length
Height
146 mm (5.75 in.)
203 mm (8.0 in.)
19 mm (0.75 in.) without DIMM or PC/104-Plus modules