xv
About This Manual
The MBX Series Embedded Controller Version B Installation and Use
manual provides general information, hardware preparation and
installation instructions, operating instructions, a functional description,
and various types of interfacing information for the MBX family of
embedded controller boards.
The information in this manual applies to MBX version B models in both
entry-level and standard configurations. The following table lists the
specific MBX models documented in this manual:
Model Number Description
Entry-Level
MBX860-001B 50 MHz MPC860 processor, 4MB DRAM, 2MB Flash, 10BaseT Ethernet,
32KB NVRAM, COMM interface connector
Standard
MBX821 models include 40 MHz MPC821 processor; PC/104-Plus; 10BaseT Ethernet; EIDE
and Floppy interfaces; 32KB NVRAM; keyboard, mouse, IR, COM1 and COM2 ports; LCD
panel connector
MBX821-001B 4MB DRAM, 4MB Flash
MBX821-002B 4MB DRAM, 4MB Flash
MBX821-003B 4MB Parity DRAM, 4MB Flash
MBX821-004B 16MB DRAM, 4MB Flash
MBX821-005B 16MB Parity DRAM, 4MB Flash
MBX821-006B 16MB DRAM, 8MB Flash
MBX860 models include 40 MHz MPC860 processor; PC/104-Plus; 10BaseT Ethernet; EIDE
and Floppy interfaces; 32KB NVRAM; keyboard, mouse, IR, COM1 and COM2 ports; COMM
interface connector
MBX860-002B 4MB DRAM, 4MB Flash
To Next Page
Loading...
