Debugger Commands
http://www.motorola.com/computer/literature 3-5
3
I2C I2C Device Read/Write
IDIR Display Filenames
IOC I/O Control for Disk
IOI I/O Inquiry
IOP I/O Physical (Direct Disk Access)
IOT I/O Teach for Configuring Disk Controller
LO Load S-records from Host
MA/NOMA Macro Define/Display/Delete
MAE Macro Edit
MAL/NOMAL Enable/Disable Macro Listing
MD, MDS Memory Display
MM Memory Modify
MMAP MPC8xx Memory Map Display
MMD Memory Map Diagnostic
MS Memory Set
MW Memory Write
NIOC Network I/O Control
NIOP Network I/O Physical
NIOT Network I/O Teach (Configuration)
NPING Network Ping
OF Offset Registers Display/Modify
PA/NOPA Printer Attach/Detach
PF/NOPF Port Format/Detach
PFLASH Program Flash Memory
PL Program Load
Table 3-1. Debugger Commands (continued)
Command Description
To Next Page
Loading...
