Maintenance and Troubleshooting 5 - 11
During data
communication, no
data was
transmitted, or
transmitted data was
incomplete.
Cable removed from
mobile computer during
communication.
Reattach cable to mobile computer and retransmit.
Incorrect cable
configuration.
See the system administrator or refer to the MC31XX Series
Mobile Computer Integrator Guide.
Communication
software is not installed
or configured properly.
See the system administrator or refer to the MC31XX Series
Mobile Computer Integrator Guide.
Table 5-7
Troubleshooting the Cables (Continued)
Symptom Possible Cause Solution
To Next Page
Loading...
Need help?
General