3 - 8 MC31XX Series Mobile Computer User Guide
•
HID
•
Dial-up Networking
•
A2DP/AVRCP.
See the following sections for information on these services.
Object Push Services via Beam
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC31XX and another Bluetooth enabled device:
1. Ensure that Bluetooth is enabled and discoverable on both devices.
2. Ensure that the two devices are within 30 feet (10 meters) of one another.
3. Tap Start > Programs > File Explorer.
4. Navigate to the file to transfer.
5. Tap and hold on the filename until the pop-up menu appears.
Figure 3-7
File Explorer Window
6. Select Beam File. The MC31XX searches for Bluetooth devices in the area.
7. Tap Tap to send next to the Bluetooth device to send the file to. The MC31XX communicates with the device
and send the file. When completed, Tap to send changes to Done.
Figure 3-8
Beam File Window
To transfer a contact between the MC31XX and another Bluetooth enabled device:
NOTE You can only send files to a remote device using the Beam function.
To Next Page
Loading...
Need help?
General