2 - 24 MC31XX Series Mobile Computer User Guide
2. As the mobile computer initializes Today screen appears.
Performing a Cold Boot
A cold boot restarts the mobile computer. The operating system and all applications are restarted. File storage is
preserved and some drivers are initialized. Only perform a cold boot if a warm boot does not solve the problem.
1. To perform a cold boot, simultaneously press and then release the 1, 9 and Power keys. Do not hold down any
other keys or buttons.
2. As the mobile computer initializes, the splash window, Figure 1-10 on page 1-10, appears.
Waking the Mobile Computer
The wakeup conditions define what actions wake up the mobile computer after it has gone into suspend mode. The
mobile computer can go into suspend mode by either pressing the Power button or automatically by Control Panel
time-out settings. These settings are configurable and the factory default settings are shown in Table 2-5.
To access the Wakeup settings:
On Window CE 6.0 devices, tap Start > Settings > Control Panel > Power icon > Wakeup tab.
Table 2-5
Wakeup Default Settings
Condition for Wakeup Power Button Automatic Time-out
AC power is applied. No Yes
Mobile computer is inserted into a cradle. No Yes
Mobile computer is removed from a cradle. No Yes
Mobile computer is connected to a serial device. No Yes
Mobile computer is connected to a USB device. No Yes
Mobile computer is disconnected from a USB device. No Yes
A key is pressed. No Yes
The scan triggered is pressed. No Yes
The screen is touched. No No
Bluetooth Yes Yes
On Motion No Yes
USB Host No No
Wireless LAN activity is detected. No No
To Next Page
Loading...
Need help?
General