Using Bluetooth 3 - 29
5. In the Service Type drop-down list, select Active Sync.
6. Tap OK. The MC31XX connects the PC and an ActiveSync session begins.
7. Tap Finish. The Connection Favorite Options window appears.
8. To end the session, tap the ActiveSync icon in the Favorite window and select Disconnect from the pop-up
window.
Personal Area Network Services
Connect two or more Bluetooth devices to share files, collaborate, or play multi-player games. To establish a
Personal Area Network connection:
1. Ensure that the Personal Area Networking profile is enabled on the MC31XX. See Profiles Tab on page 3-42
for more information.
2. Use the Connection Wizard to search for a Bluetooth device.
3. Select the device and tap Next. The Connection Favorite Options window appears.
4. Tap Next. The Connection Summary window appears.
5. Tap Connect. The MC31XX connects to the Bluetooth device.
A2DP/AVRCP Services
A2DP/AVRCP is used to connect to a high-quality stereo headset:
1. Ensure the MC31XX is connectable (required when automatic re-connect is initiated). See Device Info Tab on
page 3-33.
2. Ensure that the remote Bluetooth device is in discoverable mode. See the devices user manual for
instructions.
3. Ensure that the A2DP/AVRCP profile is enabled on the MC31XX. See Profiles Tab on page 3-42 for more
information.
4. Tap Menu > Settings > Services tab.
5. Tap Add button.
6. Select Advanced Audio Distribution Services.
7. Tap OK. The Edit Local Services window appears.
8. Tap OK twice.
9. Tap Menu > New Connection.
10. Select Connect to High-Quality Audio from the drop-down list.
11. Tap Next.
12. Select the device and tap Next.
13. Enter the PIN Code for the remote device and then tap OK. The Connection Favorite Options window
appears.
NOTE This profile supports Ad-hoc and PAN User. Network Access Profile is not supported.
To Next Page
Loading...
Need help?
General