Motorola MC31XX Series User Manual

Getting Started 1 - 15
Figure 1-20 Remove Handstrap from Battery Door Slot
To install a new handstrap:
1. Insert one end of the loop section into the mounting slot in the handle.
2. Thread the other end of the loop section through the loop and pull to tighten the loop.
Figure 1-21 Thread Loop
3. Slip the button into the loop section.
Figure 1-22 Slip Button Through Loop
4. Thread the end of the handstrap into the slot in the battery door.
Button
Loop

Motorola MC31XX Series Specifications

General

Brand	Motorola
Model	MC31XX Series
Category	Handhelds
Language	English