Description 1-5
• External Pre-selector
• Antenna Relay
• Duplexer
• External Dual Circulator Tray
In addition, the following features are also included. These features are shipped in a preset
condition, but may be altered through the use of the CPS.
• 16 Tx/Rx Frequencies – Factory Programmed with 1 Tx, 1 Rx
• 12.5 kHz or 25 kHz Operation – Factory Programmed to 12.5 kHz
• 6.25e compliant
• 1 Tx and 1 Rx (PL or DPL) Squelch Code per channel – Factory Programmed to CSQ
• Base Station Identification (BSI) – Factory Programmed as BLANK
• Push-To-Talk Priority – Factory Programmed to Repeat Path
1.2.2 Features not offered
Please disregard any references to the following items, as they are not available for the MTR3000
first release (T3000A).
• Wireline Interface Board
• Auxiliary I/O Option Board
• Peripheral temperature sensing device
• Voting or standalone Receiver
• RSSI Output (via RDAC only)
• Simplex operation (Tx=Rx)
• Integrated Tone Remote Control.
1.2.3 Frequency Ranges and Power Levels
The MTR3000 Base Station/Repeater and MTR2000 MOTOTRBO Digital Upgrade is available in the
following frequency ranges and power levels as specified in Table 1-1 and Table 1-2.
Table 1-1 MTR3000 Frequency Ranges and Power Levels
Frequency
Band
Bandwidth Power Level
UHF 403–470 MHz 8–100 W
470–524 MHz 8–100 W
To Next Page
Loading...
Need help?
General
