To Next Page
S
Sue RobertsJul 29, 2025
What to do if improper assembly leads to leakage in Motorola Receiver?
- AAndrea RayJul 30, 2025
If improper assembly leads to leakage in your Motorola Receiver, the suggested solution is to reassemble the whole radio.
What to do if improper assembly leads to leakage in Motorola Receiver?
If improper assembly leads to leakage in your Motorola Receiver, the suggested solution is to reassemble the whole radio.
How to fix a faulty front housing kit on a Motorola Receiver?
If you have a faulty front housing kit on your Motorola Receiver, it might be due to pinching of the main O-ring, battery connector seal, and SIM card door seal during assembly. The suggested solution is to replace the front housing kit. Alternatively, you can scrap the front housing kit.
What to do if Motorola Receiver has faulty back chassis sub-assembly?
If your Motorola Receiver has a faulty back chassis sub-assembly, it may be caused by pinching of the main O-ring, battery connector seal, and SIM card door seal during assembly. The suggested solution is to replace the back chassis sub-assembly. Alternatively, you can scrap the back chassis sub-assembly.
How to fix Motorola Receiver when radio fails the vacuum leak test?
If your Motorola Receiver fails the vacuum leak test, you should identify and service or replace the leak area.
General| Operating Temperature | -30°C to +60°C |
|---|---|
| GPS | Yes |
| Encryption | AES-256 |
| Display | 2.4" |
| Bluetooth | Yes |
