Motorola MXP600 - Updating Encryption Keys; Viewing OPTA; Setting the OPTA Filter; Starting Crypto Registration

32.3
Updating Encryption Keys
Prerequisites:
• End-to-End Encryption is enabled.
• Ensure that you are not in an active call or in Direct Mode Operation (DMO).
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu→Upd Encr Keys→Upd Group Key.
32.4
Viewing OPTA
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu→Show OPTA.
32.5
Setting the OPTA Filter
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu→OPTA Filter.
3 Scroll to characters that must be masked when the OPTA name is displayed and press Select.
4 Press Done to confirm the settings.
32.6
Starting Crypto Registration
Prerequisites:Ensure that your radio is not in an active call or in Direct Mode Operation (DMO).
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu→Crypto Registr→Start Registr.
32.7
Turning Encrypted Audio On or Off
When and where to use:To determine if audio is muted in erroneous decryption.
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu→Audio Settings.
MN006360A01-AE
Chapter 32: Crypto Menu
157