Motorola MXP600 - Viewing a Status Message Number; Sending Status Messages; Sending Targeted Status Messages

14.10.1
Viewing a Status Message Number
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Press the Menu key and select View.
14.10.2
Sending Status Messages
When and where to use:Status messages are sent to either a selected talkgroup or a programmed
private number. Only one option can be enabled at a time.
• If sending statuses to talkgroups is enabled, switch to the talkgroup to which you want to send a
status message.
• If sending statuses to private numbers is enabled, no action is needed. The private number is set up
by your service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Send status messages by using one of the following options:
Option Actions
Sending existing status mes-
sages in your radio
a Select the required status message.
b Perform one of the following actions:
• Press Select.
• Press the PTT button.
• Press the Send key.
Sending status messages using
a status number or if the status
list is empty
a Enter a 5-digit status message number.
b Press Send.
14.10.3
Sending Targeted Status Messages
When and where to use:Targeted Status Messages are sent to any talkgroup defined for your radio
or any private number from the contact list or entered manually.
NOTE: This feature is not supported on Dimetra networks.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Send status messages using one of the following options:
MN006360A01-AE
Chapter 14: Messages
93