Chapter 30
Location
The Location menu allows you to enable the Global Positioning System (GPS) or Global Navigation
Satellite System (GNSS). You can also view your position and testpage, and change the accuracy of
the location.
30.1
Enabling GPS or GNSS
NOTE: Your service provider can enable this feature.
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Interface→On.
30.2
Viewing Your Position
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Position.
The display shows your last calculated position.
3 To refresh your position, select Position and press Refresh.
Postrequisites:
Sometimes, the GPS or GNSS feature is unable to complete calculating a location.
Enhance the GPS or GNSS performance by performing the following actions:
• Stay in the open.
• Enhance reception by repositioning your radio.
• Stand still.
MN006360A01-AE
Location
151
To Next Page
Loading...
