Motorola MXP600 - Test Setup and Testing; 4.1 Performing Typical Test Setup

6 Close the SIM/microSD connector plastic door.
7 Install the battery.
Uninstalling the MicroSD Card
Procedure:
1 Remove the battery.
2 Flip open the SIM/microSD connector plastic door from the finger scoop area.
NOTE: Avoid pressing on the SIM/microSD connector plastic door.
3 Flip open the microSD card holder.
4 Remove the microSD card from the microSD card holder.
MN006360A01-AE
Chapter 4: Getting Started
32