EasyManua.ls Logo

Motorola MXP600 - Using Timed Talkgroup Change; Selecting Talkgroups by Index; High or Low Audio Toggle

Motorola MXP600
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Select OptionsTG by Folder. Select a folder (for example, Favorite) and then a talkgroup
name.
NOTE: Your radio can access up to three levels of the folder structure.
9.3.1
Using Timed Talkgroup Change
This feature allows you to switch a selected talkgroup between the currently selected talkgroup and
a predefined talkgroup (TMO or DMO), making the predefined talkgroup the selected talk group for
a predefined time by using a One-Touch button. After the timer expires, your radio returns to the
previously selected talkgroup.
Prerequisites:Timed Talkgroup Change is assigned to a One-Touch button.
Procedure:
1 Press and hold the One-Touch button.
2 Your radio switches the selected talkgroup to the predefined talkgroup for a predefined amount
of time.
During the predefined time the radio initiates or joins group communication (SDS, status SDS, or
call) on the predefined talkgroup as the selected talkgroup.
Your service provider can assign a function to the second press of the One-Touch button to:
Return to previously selected talkgroup
Restart the predefined time
No action
3 When the timer expires (potentially after being restarted a number of times) the radio switches to
the previously selected talkgroup.
9.3.2
Selecting Talkgroups by Index
Procedure:
1 From the home screen, enter talkgroup speed number and *.
2 Press Attach.
NOTICE: To start a group call, press the PTT button.
9.4
High or Low Audio Toggle
Your radio is able to switch from the external earpiece to the main speaker using One-Touch button
and is not required to disconnect the external earpiece or PHF.
The internal speaker is at the middle of your radio for high audio. The internal earpiece is at the top
of your radio for low audio. Audio can be routed to either the speaker or the earpiece using the Audio
Toggle menu or the assigned One-Touch Button. To route the audio using the Audio Toggle menu,
you must select MenuSetupAudioAudio Toggle.
The states of the routed audio are:
Speaker High
indicates that audio is routed to the main speaker.
MN006360A01-AE
Chapter 9: General Radio Operation
70

Table of Contents

Other manuals for Motorola MXP600

Related product manuals