EasyManua.ls Logo

Motorola MXP600 - Chapter 29: Networks; Selecting Network Operation Mode; Network Select; Selecting Your Network

Motorola MXP600
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 29
Networks
The Networks menu allows you to switch between the radio operation modes.
29.1
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks.
3 Select one of the following options:
Option Description
Network Sel Selects the network to which the radio is allowed to
register.
Trunked Mode Switches to the mode using infrastructure.
Direct Mode Switches to the mode without using infrastructure.
Repeater Mode Switches to the Repeater Mode.
TXI Mode Activate to stop sending any radio transmission.
NOTE: If your radio is in TXI Mode, you
cannot switch from Direct Mode to Trunked
Mode or Repeater Mode.
TG Net Sel Selects one or multiple networks determined by the
selected talkgroup.
29.2
Network Select
The Network Select sub-menu allows you to select a network to register your radio.
29.2.1
Selecting Your Network
NOTE: Network Sel is available only in TMO or Gateway mode, otherwise your radio displays
Service Restricted message.
Procedure:
1 From the home screen, press the Menu key.
2 Select NetworksNetwork SelHome Only.
Your radio registers to the home network.
MN006360A01-AE
Chapter 29: Networks
148

Table of Contents

Other manuals for Motorola MXP600

Related product manuals