Option Actions
• To set the function for volume setting, select Volume Ad-
just..
• To set the function to predefined One-Touch Button fea-
tures, select OTB Feature.
19.15
Entering Car Kit Settings
The car kit connects accessories to your radio in a car and enables you to operate your radio hands-
free. You can connect visor microphones, external speakers, handsets, external Push-to-Talk (PTT),
and external emergency buttons through the car kit.
NOTE: An external TETRA or GPS antenna connected to the cradle improves signal reception.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Car Kit.
3 Set the car kit by using the following options:
Option Actions
Activating or deactivating external
speakers
a Select Spkr On/Off.
b Select Speaker On or Speaker Off.
Enabling or disabling extra sound
and light notification on incoming
private calls
a Select Horn&Lights.
b Select On or Off.
Enabling or disabling vibration
a Select Vibrate.
b Perform one of the following actions:
• To disable vibration, select Always Ring
Only.
• To enable vibration as defined in the Vibrate
menu, select Normal Settings.
Setting the radio display when con-
nected to a car kit
a Select Display→Flip Display.
b Perform on of the following actions:
• For normal display, select Off.
• For flipped display, select On.
Defining the backlight function
when connected to a car kit
a Select Backlight.
b Perform one of the following actions:
• To turn on backlights by pressing any but-
ton, select Auto.
• To keep backlights off, select Disabled.
MN006360A01-AE
Chapter 19: Setup
120
To Next Page
Loading...
