Motorola MXP600 - Predefined Templates; Viewing Predefined Templates; Sending Predefined Templates; Using Status Messages

Option Actions
Sending the message to a talk-
group
Select the required talkgroup from the TalkGroup
List.
Sending the message to an ad-
dress in your contact list
a Press abc.
b Select the name of the recipient.
Sending the message to a con-
tact or talkgroup that is not con-
figured in the radio
a Enter the contact number.
b Press Send.
14.9
Predefined Templates
Predefined message templates are programmed into your radio.
14.9.1
Viewing Predefined Templates
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Predefined.
3 Highlight the required template and press Menu key.
4 Select View.
14.9.2
Sending Predefined Templates
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Predefined.
3 Highlight the required template.
You can edit the predefined template before you send it. Press the Menu key and select Edit.
The edit screen opens with the template text. You are only allowed to replace the existing text.
4 To send the template, perform one of the following actions:
• Select Send.
• Press the PTT button.
• Press the Send key.
14.10
Using Status Messages
There are two types of status messages: statuses and targeted statuses. Your service provider
determines which type is enabled on the radio.
MN006360A01-AE
Chapter 14: Messages
92