Motorola MXP600 - Scan; Activating Talkgroup Scanning; Setting Talkgroups in the Active Scan List

22.2
Scan
The Scan menu item allows you to activate or deactivate scanning, view the active scan list, and edit
the scan lists. This feature is available only for Trunked Mode Operation. Your radio joins any group
call as long as this group is defined in the scan list and scan is turned on.
22.2.1
Activating Talkgroup Scanning
When and where to use:If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the Menu key.
2 Select Group Setup→Scan→Scanning.
3 Select Select List and then a list name.
Your radio displays list name selected.
4 Select Scanning→On.
Your radio is scanning on the predefined scan list.
22.2.2
Setting Talkgroups in the Active Scan List
When and where to use:If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the Menu key.
2 Select Group Setup→Scan→Active List.
NOTE: If Scanning is Off is displayed, go to Group Setup→Scan→Scanning→On
to enable scanning.
3 Select View and highlight the required talkgroup.
4 Press Menu.
5 Select one of the following options:
Option Description
Delete Erases this group from the active scan list.
Priority Sets the priority status of the talkgroup:
• Low
• Medium
• High
MN006360A01-AE
Chapter 22: Group Setup
134