Motorola MXP600 - Setting Vibrate in Covert Mode; Setting Remote Control

Setting Vibrate in Covert Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→Covert Mode→Vibrate.
3 Select one of the following options:
Option Description
On Restore all vibrations.
Off Disable all vibrations.
18.6
Setting Remote Control
There are two types of remote control, Short Data Service (SDS) Remote Control and Status Remote
Control. Only one type of remote control can be active on your radio.
NOTE: SDS Remote Control is a Software Selling Feature.
When and where to use:To toggle remote control
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→Remote Control.
3 Select On to enable, or Off to disable remote control.
MN006360A01-AE
Chapter 18: Security
108