Motorola MXP600 - Setting Ring Style; Setting Volume

Option Actions
• Vibe On
• Vibe Off
Status Messages and Text Messages
a Select Mail Rcvd.
b Select one of the following options:
• Vibe then Ring
• Vibe Only
• Ring Only
19.2
Setting Ring Style
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Ring Style.
3 Select one of the following options:
Option Description
Duplex To set a new ring style for all incoming duplex calls.
Simplex To set a new ring style for all incoming simplex calls.
DMO Simplex To set a new ring style for all incoming Direct Mode
Operation (DMO) simplex calls.
The display shows the current ring style used.
4 Scroll to the desired style and press Select.
The new ring style is played immediately for a few seconds. If necessary, adjust the volume
level.
19.3
Setting Volume
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Set Volume.
3 Select Speaker or Earpiece.
4 Select one of the following options:
Option Description
Voice Vol Sets the volume level for voice.
Duplex Vol Sets the volume level for duplex ringtones.
Simplex Vol Sets the volume level for simplex ringtones.
MN006360A01-AE
Chapter 19: Setup
110