30.4
Changing Location Accuracy
NOTE: The accuracy of the Global Positioning System (GPS) or Global Navigation Satellite
System (GNSS) Location Service depend on the coverage and selected accuracy mode.
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Accuracy.
3 Select one of the following options:
Option Description
Medium To optimize power consumption but with less accurate
positioning.
High To have more accurate positioning but with more power
consumption.
NOTE: Medium is the default mode. If your radio is connected to an external charging
device, your radio automatically enters the High mode.
30.5
Backlog
Backlog sub-menu allows you to enable or disable, view, and delete backlog reports.
NOTE: The backlog of location reports is only available when Local Information Protocol (LIP) is
enabled.
30.5.1
Enabling or Disabling Backlog
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Backlog→Enablement.
3 Select one of the following options:
Option Description
On To enable recording the location report backlog.
Off To disable recording the location report backlog.
30.5.2
Viewing Backlog Reports
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Backlog→Reports.
The display shows the number of backlog reports that are stored.
MN006360A01-AE
Chapter 30: Location
153
To Next Page
Loading...
