30.3
Viewing the Testpage
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Testpage.
3 Select one of the following options:
Option Description
Position To view detailed information of your current position.
Your radio displays:
• Time
• N for latitude
• E for longitude
• H for height
• Sats Used for several tracked satellites
• B for bearing
• HS for horizontal speed
• LC for level of confidence
Power To view detailed information of a satellite. Your radio
displays:
• PRN code
• Status
• Mode
• C/N for carrier-to-noise ratio
Version To view detailed information of the software version.
Your radio displays:
• SW for software version
• HW for hardware version
• ASIC for application-specific integrated circuit
• RC for release code
MN006360A01-AE
Chapter 30: Location
152
To Next Page
Loading...
