22.1.3
Determining Talkgroup When Switching Mode
When and where to use:To determine the talkgroup of your radio when switching from TMO to DMO
or Repeater mode.
Procedure:
1 From the home screen, press the Menu key.
2 Select Group Setup→Operations Parameters→Home Group TMO to DMO/Repeater.
3 Select one of the following options:
Option Desciption
Last Selected Your radio enters the last selected DMO talkgroup
when in DMO. If Group Mappings are configured,
they take precedence. The DMO Talkgroup map-
ped to the current TMO Talkgroup is used.
Group Mappings Your radio enters the DMO Home Group unless a
Group Mapping is configured. If Group Mappings
are configured, they take precedence. The DMO
Talkgroup mapped to the current TMO Talkgroup is
used
Home Group Your radio enters the DMO Home Group, ignoring
possible group mappings.
22.1.4
Configuring Home Group
When and where to use:To configure the home groups on your radio.
Procedure:
1 From the home screen, press the Menu key.
2 Select Group Setup→Operations Parameters.
3 Perform one of the following actions:
Option Action
To configure the TMO Home Group or
Home Folder
Select TMO Home Group.
To configure the DMO Home Group Select DMO Home Group.
MN006360A01-AE
Chapter 22: Group Setup
133
To Next Page
Loading...
