Chapter 10
Operation Modes
This section contains information on available modes that your radio can operate in.
10.1
Entering TMO or DMO Mode
Entering TMO Mode
Procedure:
Perform one of the following actions:
• From the home screen, press Options. Select Trunked Mode.
• Press the Menu key, select Networks→Trunked Mode.
Entering DMO Mode
Procedure:
Perform one of the following actions:
• From the home screen, press Options. Select Direct Mode.
• Press the Menu key, select Networks→Direct Mode.
10.2
Selecting DMO Communication Options
In Direct Mode Operation (DMO), you have different options to communicate with other radios in the
same talkgroup through the gateway or repeater.
Procedure:
1 From the home screen, press Options.
2 Select Config..
3 Select a DMO communication by using one of the following options:
Option Actions
To communicate in your radio range only Select MS-MS.
To communicate with the infrastructure
using the first available gateway for that
talkgroup
Select Gateway→Automatic.
To communicate with the infrastructure
using the specified gateway address for
that talkgroup
a Select Gateway→Specific.
b If your radio displays Selected Gate-
way: None, press Edit to enter the cur-
rent gateway address.
MN006360A01-AE
Chapter 10: Operation Modes
72
To Next Page
Loading...
