Motorola MXP600 - Setting Call-Out Availability

Option Actions
d Select one of the following options:
• Edit – for User Defined Additional Address
alias.
• View – for Pre-defined Additional Address alias.
The display shows the Alias, the ISSI/ITSI/GSSI and
the Status of the address (Pre-Defined or User Defin-
ded).
Entering new additional ad-
dresses
a Select Select Address.
b Select [New Address].
c Press Change key.
d Enter new values of the Alias and ISSI/ITSI/GSSI
fields, press Done key.
The new alias appears in the list of available aliases.
There is no possibility to have two Additional Address
items with the same Additional Address Alias.
Editing additional addresses
NOTE: Applicable only for User-Defined po-
sitions.
a Select Select Address.
b Scroll to select the alias of the Additional Address
you wish to edit.
c Press Menu key.
d Select Edit.
e Press Change key.
f Enter new values of the Alias and ISSI/ITSI/GSSI
fields, press Done key.
The changed alias appears in the list of available ali-
ases. There is no possibility to have two Additional
Address items with the same Additional Address Alias.
Deleting additional addresses
NOTE: Applicable only for User-Defined po-
sitions.
a Select Select Address.
b Scroll to select the alias of the Additional Address
you wish to delete.
c Press Menu key.
d Select Delete and confirm deletion by the OK key.
14.12
Setting Call-Out Availability
Prerequisites:Contact your service provider to enable the Call-Out Availability feature.
MN006360A01-AE
Chapter 14: Messages
95