Option Actions
b Select Enabled or Disabled.
NOTE: When enabled, warning messages
will be prompted.
19.7
Setting Tones
Your radio has two tone packs that is Classic Tones (default) and New Tones.
Prerequisites:Contact your service provider to enable a tone pack.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Tones.
3 Set tones by using the following options:
Option Actions
Keypad Tone
a Select Keypad Tone.
b Select On or Off.
All Tones
a Select All Tones.
b Select On or Off.
Tone indication when pressing
the PTT button
a Select Talk Permit.
b Select Tone On or Tone Off.
Tone indication when a recipi-
ent is ready to receive transmis-
sion
a Select Clear to send.
b Select Tone On or Tone Off.
Tone indication for missed
calls, unread messages, and
low battery level
a Select Periodic Alert.
b To actiate or deactivate periodic tones, select
Alert.
c To indicate the time between each periodic tone,
select Period.
D-PTT tone when your radio is
idle or in a Group Call
a Select D-PTT Tones.
b To activate or deactivate D-PTT tones, select D-
PTT Mode.
c To indicates how many times the D-PTT tone is
played, select Tone Style.
MN006360A01-AE
Chapter 19: Setup
113
To Next Page
Loading...
