2 Select Setup→Time & Date.
3 Set the time and date by using the following options:
Option Actions
Displaying the time and date on
your home screen
a Select Display.
b Perform one of the following actions:
• To display the time and date, select Time &
Date.
• To display the time only, select Time Only.
• To display the date only, select Date Only.
• To disable the time and date display, select
Off.
Formatting the time
a Select Format→Format Time.
b Select one of the following options:
• 12-Hour
• 24-Hour
Formatting the date
a Select Format→Format Date.
b Select one of the following options:
• DD/MM/YY
• MM/DD/YY
• DD-MON-YY
• YY/MM/DD
Setting the time and date manual-
ly
a Select Set.
b Select one of the following options and adjust the
value with the Navigation keys or keypad.
• Set Time
• Set Date
• Time Offset
c Press Done.
NOTE: The offset value is adjusted with
15 minute steps, up to 14 hours ahead or
behind.
Setting automatic updates for the
time and date
a Select System Update.
b Perform one of the following actions:
• To use internal time and offset, ignoring up-
dates from the infrastructure, select Off.
• To update time from the offset programmed
by your service provider from the infrastruc-
ture time, select Time Only.
MN006360A01-AE
Chapter 19: Setup
116
To Next Page
Loading...
