NE-4100 Series User’s Manual Serial Command Mode
9-12
Web Console
Please refer to Chapter 6 for information on opening the web console. Click on the Serial
Command Mode folder in the navigation panel.
Modify the settings as needed, and then click on Submit. Remember that you will need to save the
configuration and restart the module for any changes to effect.
Serial Console
To access the serial console, connect the module’s serial console port (P1) to your PC’s serial port,
and then use a terminal emulator program to enter the serial console. Please refer to the Serial
Console section in Chapter 5 for details on how to open the serial console. Once the serial console
is open, it functions exactly the same as if connecting by Telnet console.
To Next Page
Loading...