5
5
Chapter 5 Initial IP Address Configuration
When setting up your NE-4100 Series module for the first time, the first thing you should do is
configure the IP address. This chapter introduces the methods that can be used to configure the
module’s IP address. For more details about network settings, please refer to the Network Settings
section from Chapter 6. Web Console Configuration.
This chapter includes the following sections:
Static vs. Dynamic IP Address
Factory Default IP Address
NE-4100 Series Administration Suite Å re
commended configuration method
ARP
Telnet Console
Serial Console (19200, n, 8, 1)
To Next Page
Loading...